| |
Venmar Wall Control
Venmar Ultima Wall Control
Product ID: 40340
The Ultima wall control helps control fresh air flow and maintain an even temperature.
Control Options:
- Minimum or maximum air exchange 20 minute air exchange/40 minutes off
- Minimum or maximum filtration/recirculation
- 20 minute air exchange/40 filtration
- Used with Solo, Duo, HE and 3055 units
20 minutes of air exchange and 40 minutes filtration and recirculation brings a breath of fresh, filtered air into the home.
|
Venmar Constructo Wall Control
Product ID: 40350
The Constructo wall control allows you to select low or high speed continuous exchange or simply tun the unit off.
The humidistat automatically overrides the unit to high speed, lowering the indoor relative humidity.
Control Options:
- Off - On
- Low speed
- High speed
- Dehumidistat control
- Used with Constructo units only.
|
Venmar Supra Wall Control
Product ID: 40320
The Supra wall control has clear graphics showing easy-to-use settings.
Control Options:
- Low speed
- High speed
- Intermittent mode with 20 minutes air exchange and 40 minutes off
- Used with Solo, Duo, HE and 3055 units.
|
Venmar Venta Wall Control
Product ID: 40310
The Venta wall controls three settings provide a simple, easy way to control indoor air quality
in your home. Low speed is ideal for normal occupancy, providing a continuous low rate of ventilation.
By adjusting the dehumidistat setting to the outside temperature conditions, the homeowner can
automatically control condensation on windows.
Control Options:
- Off - On
- Low speed
- High speed
- Dehumidisat control
- Used with Solo, Duo, HE and 3055 units.
|
Venmar Dehumidistat Wall Control
Product ID: 11297
The Dehumidistat wall control is designed to control the desired maximum indoor relative humidity level during fall,
winter and spring. This control is graduated in relative humidity percentage degrees.
Control Options:
- Used as a remote switch not a main wall control
- Used with Solo, Duo, HE, 3055, Constructo, EA1500 and Bath Fans
|
Venmar Interface for Honeywell
Product ID: 40360
This interface control allows for the Honeywell "Perfect Comfort Center" control to manage the operation of your
Venmar ventilation system, replacing the Venmar master wall control. "Perfect Climate" Control - Solo/Duo/HE only.
|
Venmar 20/40/60 Minute Push Button
Product ID: 03364
The VENMAR 20/40/60 Lighted Push Button is a low voltage, remote mounted control which provides 20, 40 or 60
minutes of high speed operation. After that time, the double arrow light at the top of the push button will go
out and the VENMAR unit will return to the setting previously selected by the homeowner.
This control can be used with all VENMAR Solo, Duo and HE models.
Three color-coded, 22 gauge (or larger) wires make the connection from the lighted push button to the terminal
block located inside the electrical box on the outside of the VENMAR unit.
Venmar 20 Minute Lighted Push Button
Product ID: 12030
The VENMAR Lighted Push Button is installed in bathrooms, kitchens and/or laundry rooms to provide 20 minutes of
high speed ventilation at the push of a button. The switch is supplied and mounted on a white switch plate.
Used with Solo, Duo, HE, 3055 and Constructo units.
Venmar Mechanical Timer Switch, 0-60 Minute - Ivory
Product ID: FD60MWC
Allows for up to 60 minutes of high speed operation and are installed in bathrooms, kitchens and laundry rooms.
Available in white and ivory.
Venmar Wireless 20 Minute Remote Push Button
Product ID: 03366
The wireless push button control is ideal for retrofit projects. Without a single foot of wiring, this
remote control is easily installed in any room and has a 500 foot range. It activates the system at
high speed for 20 minutes.
Used with the Solo, Duo, HE and 3055 units.
Venmar Wireless 20 Minute Remote Push Button KIT
Product ID: 13027
(Includes: 3 remotes 03366 and 1 receiver 03365) The VENMAR Lighted Push Button is a low voltage, remote
mounted control which provides 20 minutes of high speed operation. After that time, a double arrow light
at the top of the control will go out and the VENMAR unit will return to the setting previously selected
by the homeowner.
This control can be used with all VENMAR models.
Three color-coded, 22 gauge (or larger) wires make the connection from the lighted push button to the
terminal block inside the electrical box on the outside of the VENMAR unit. Each terminal is labeled I,
OC, OL. It is critical that the same color wire is attached to the same position at each end. For example:
red to I, blue to OC, black to OL.
The lighted push button requires a standard single gang electrical
box, and by code must be independent of any line voltage controls.
Please consult with FLARE's sales personnel for additional details and your requirements.
|
|
|
|
Venmar Wall Control